BBC A3000

 [Archimedes]   [Computers]  [Unix ]

Introduction

The BBC A3000 was launched in May 1989, just before the A4x0/1 range. It was designed to be a "cheap" computer with limited expansion and a combined keyboard and sytem unit. It had an ARM2, RISCOS 2.00 and the MEMC1a. Once again Acorn omitted the RS232 port to save money and expansion is limited to a single mini-podule and a single external podule. There is no option of a hard drive, except on an external SCSI or IDE controller podule. The A3000 was the last "BBC Microcomputer" with a BBC logo on the keyboard.

Here is an Acorn publicity photograph of the A3000:

 The A3000 and its successors the A3010  ,  A3020   and A4000    were very popular in schools and 3rd parties made a wide range of add-ons and upgrades including:

• IDE and SCSI hard discs
• User and analogue port
• Ethernet
• Memory upgrades
• Digitisers

 The following models were launched [as far as I know]:

•  AKB01 - 1MB
• AKB06 - 1MB Learning Curve
• AKB16 - A3000 Special Access
• AKB18 - A3000 Special Acces with monitor and PRES monitor stand
• AKB19 - Learning Curve
• AKB29 - Learning Curve

 Manuals and documents

Here is the Acorn product brochure for the A3000:
 

Here is the A3000 Welcome Guide .

Here is the Acorn A3000 Service Manual.

Here is the Acorn A3000 Technical Reference Manual and technical drawings .

In July 1989 PCW published a review of the A3000 titled "Acorn A3000  "

BBC A3000

I bought this A3000 in 2002. As you can see from the pictures it came from a local school. It has been upgraded from 1 to 2MB with a Cumana 1MEG A3000 memory upgrade . It has an Acorn AKA12 Midi and User Port  mini-podule and an Econet interface . The OS has been upgraded from RISC OS 2 to RISC OS 3.11.

 Acorn A3000 running RISC OS 3.11

 The working A3000 running RISC OS 3.11 

A3000 right hand side showing the floppy disc drive 

The right hand side of the A3000, showing the floppy disc drive.  

A3000 rear view 

The back of the A3000.  On the top of the case you can just see the Hoe Bridge School security marking. On the back, at the top centre, is the AKA12 MIDI/user port mini podule with 3 MIDI DIN sockets. Below are the A3000 interfaces, from left to right: expansion, RGB Monitor, Mono video, headphones, parallel, serial and econet. The serial upgrade is filled in spite of the sticker above the serial port.  

 A3000 left hand side, showing the power on/off switch (and school safety test sticker)

  The left hand side of the A3000, showing the On/Off switch and a safety check sticker.

A3000 case bottom 

The bottom of the A3000,  showing the serial number label in the middle at the top and the socket for the mouse in the middle on the right. Interestingly, to the right of the mouse connector is the cover (with a screw in the middle) to an unused battery compartment.  

A3000 with to cover off 

The A3000 with the top cover removed, showing at the front is the keyboard. In the top left is the power supply and the floppy disc drive is in the top right. Between the power supply and the floppy drive at the top is the AKA12 MIDI/User port mini podule . Below the AKA12, next to the power supply is the Econet Module  and below that is the ribbon connector between the keyboard and the motherboard. In the middle between the floppy disc drive and the keyboard is the Cumana 1MEG A3000 memory upgrade .  

A3000 with keyboard removed 

 The A3000 with the keyboard removed, showing in the top left is the Acorn AKA12 MIDI/User port mini-podule. Below the AKA12 is the Econet Module. Below the Econet Module is the socket for the keybard ribbon cables and below that is the battery for the CMOS RAM. To its right are the 4 ROMs with the RISC OS 3.11 Operating System. In the middle below the floppy disc drive is the Cumana 1MEG A3000 memory upgrade. 

A3000 motherboard, with all the addons removed.  

The A3000 motherboard (Issue 3).  

Specification: